Nothing
to pay until 2009
0% if account settled within 9 months
Vestax PMC007 2 Channel Mixer
BONNET STYLE FACE PLATE : By loosening the screw
underneath the body and pulling forward the face plate pops up just like a car
hood (bonnet). Also, the design is centered to give a soft and warm 3
dimensional feel and esthetic giving comfort and concentration to the user.
RAPID EXCHANGE FADER : Time for replacing the fader
has been a longtime hassle, but now has been cut to a minimum. It's as easy as
just pinching each side of the fader panel, disconnecting and replacing it
with a new one. No more worrying about losing screws or forgetting your screw
driver!
BALANCED XLR OUTPUT : Ever have the problems from feed
back or electrical distortion from lights and other equipment in the club? A
balanced transmission is extremely important and effective in certain
situations, that is why the PMC-007 has applied balanced XLR output, much
superior to the usual RCA pins or PHONE jacks.
FADER CURVE CONTROL : Whether you scratch or mix, the
cross fader can be delicately controlled with rotary knobs to set your
personal setting. The input fader has a 3 step switch that can be quickly and
efficiently switched whenever the input fader turns for the scratch.
CROSS FADER REHEARSAL MUTE/FREEZER : Ever have times
when you couldn't scratch on the master fader without the sound blasting out
through the master? Now you can with the 007. Introducing a button function
where the master output freezes and what ever is done on the master fader only
comes out only to be heard on the headphone monitors.
EFFECT SEND/RECEIVE : On/Off switching can be done
instantly on both channels and can also control levels with the mini fader
allowing the monitoring to system to be highly advanced. The mini fader can
also be used to control master and receiving volume balance by switching the
mini switch underneath the face plate.
3 BAND ISOLATER/SCRATCH EQ : A Vestax infinity cut and
+4dB boost is equipped on each 3 band isolater PGM. To balance an optimal
scratch, the new EQ buttons are supplied to instantly set the isolater EQ on
the specific channel. If you're a serious scratch DJ, this feature is a must
